About Fire Restoration Services

29 March 2019
 Categories: , Blog

Share

When there is a fire, the first emergency situations to be dealt with on the spot are making sure everyone is out and safe and putting out the fire. However, the next part of dealing with a home fire is to deal with the aftermath that is left behind, both from the fire and from the water. If there has been a fire in your home, then you are going to want to know what you are facing and what needs to be done. If the home is no longer livable, then it will be counted as a total loss and will need to be safely cleared from the property. This is something you should leave to the professionals due to the possibility of dangerous materials and other health hazards. If your home can be salvaged, then you will be looking at fire damage restoration. This article will give you more insight into what fire damage restoration services involve.

Fire aftermath must be dealt with right away

Your home will have damage to it that is not only caused by the fire itself, but also from the water used to put out the flames, the smoke, and the soot. The longer it takes for you to have someone come out to tend to the damage, the worse it can get. The water alone can cause extensive water damage to your home and belongings that can lead to rot, mildew, and mold. Breathing in particles of soot that are in the air is especially bad for your health and can even lead to death, so it's best to stay out of the home until the professionals have removed all the soot.

Hire a fire restoration contractor

Once you hire a fire restoration contractor, they will assess the damage to your home and let you know how much you are looking at from a financial standpoint. The fire restoration contractor will then start working on getting your house back to the condition it needs to be in for you to move back in.

The fire restoration professional will begin by trying to save as many of your appliances and belongings as they can and drying up the water. The more they can save, the less you will have to replace. They will perform a total cleanup by using a special industrial-grade product to scrub down all of the surfaces. They will use dry-cleaning soot sponges to remove the loose soot off of surfaces. The contractor will also have a special vacuum cleaner that they will use to get up everything from the floors and upholstery. Your HVAC system will also be checked and cleaned thoroughly if there is a need to do so.

For more information on what a fire restoration service does, speak to a company such as Clean Care Inc.